User's Manual

AUTOFR - Automatic Form Printing Feature

AUTOFR treats any incoming data as a variable in

tended for printing. This means if you send the

printer a memory partition command, the label will

print, if you send a delete command - the label will

print! So, while you are testing AUTOFR it is best to

use another name for the form. Once you are satis

fied with the form, rename it AUTOFR before you

download it. There is no need to specifyafileexten

sion.

Isolating Data From

the Input Device

Place the printer in the diagnostic dump mode

andsendfrom yourdatainput device.Allcharac

tersthedevicesendswillbeprintedonthelabel.

If nothing prints, nothing is arriving - check

pin-outs and serial settings.

Disabling AUTOFR Send a XOFF data character (13 hex. or ASCII

19) oraNUL(00hex.orASCII0)totheprinter.

Theformmaynowbedeletedfromtheprinter.

Removing AUTOFR Theprogrammermustsenda Delete Form-FK

command to the printer after disabling

AUTOFR.

Example:

FK"AUTOFR"¿

3-10

980352-001 Rev.A