Specifications

GG Command - Print Graphics
Description Use this com mand to print a PCX (for mat)
graphic that has been pre vi ously stored in
printer mem ory.
Syntax GGp
1
,p
2
,{“NAME” | Vari able Data}
Parameters p
1
= Hor i zon tal start po si tion (X) in dots.
p
2
= Ver ti cal start po si tion (Y) in dots.
“NAME” or Vari able Data = This is the
graphic name used when the graphic
was stored. This name can be sup plied
via vari able data (V00 - V99).
• The name may be up to 8 char ac ters long.
• Graphic names stored by the printer are case
sen si tive and will be stored ex actly as en tered
with the GM com mand line; i.e.
“GRAPHIC1”, “graphic1” and
“graPHic1” are three dif fer ent graph ics
when stored into the printer or when re trieved
by the user.
Example:
GG50,50,"LOGO1"¿
FK"TESTFORM"¿ :de lete form “TESTFORM”
FS"TESTFORM"¿ :be gins the form store se quence of
:the form “TESTFORM”
V00,8,N,"En ter Graphic Name:"¿
GG50,50,V00¿
FE¿ :ends form store se quence
FR"TESTFORM" :re trieves the form named TESTFORM
?¿ :Down load vari ables
LOGO1 :Graphic name to be re called and
:printed
P1¿ :Print one la bel with graphic LOGO1
980352-001 Rev.D 3-57