Specifications

FS Command - Store Form
Description This com mand be gins a form store se quence.
Syntax FS"FORMNAME"
Parameters “FORMNAME” =This is the form name that
will be used when re triev ing the stored
form.
• The name may be up to 8 char ac ters long.
• Form names stored by the printer are case
sen si tive and will be stored ex actly as en tered
on the FS com mand line; i.e. “FORM1”,
“form1” and “FoRm1” are three dif fer ent
forms when stored into the printer or when re -
trieved by the user.
• Global com mands such as EI, EK, ES, FI,
FK, GI, GK, GM, M, N, P, TS, U, UE, UF,
UG, Y, W, ?, ^@ should not be used in a
form store se quence.
Form name, AUTOFR, is re served for au to matic,
sin gle form re call, see page 3-9 for de tails.
❏ All com mands fol low ing FS will be stored in
form mem ory un til the FE com mand is re -
ceived, end ing the form store pro cess.
❏ De lete a form prior to up dat ing the form by
us ing the FK com mand. If a form (with the
same name) is al ready stored in mem ory, is -
su ing the FS com mand will re sult in an er ror
and the pre vi ously stored form is re tained.
❏ To print a list of the forms cur rently stored in
mem ory, use the FI com mand.
❏ Data stored within a form can not have the
Null (0 dec. 00 hex.) char ac ter as part of any
data within that form.
❏ A form will not store if insuf fi cient mem ory is
available. See the M com mand for de tails on
ad just ing and con fig ur ing mem ory for forms,
graphics and soft fonts.
980352-001 Rev.D 3-55