Specifications

<Esc>p Command - Generate Pulse CDK
Description Gen er ate a drawer kicker pulse.
Syntax <Esc>pp
1
p
2
p
3
Parameters p
1
= Se lect Drawer
Drawer 1 (SDRV1) = 31 hex.
p
2
= Pulse width in mul ti ples of two milli- sec -
onds (2 msec).
Range = 00 - FF hex.
p
3
= This pa ram e ter must be pres ent for pars -
ing the com mand but the value is ig -
nored by the printer.
Range = 00 - FF hex.
ASCII Hex Value 1B 70 p
1
p
2
p
3
(p
1
rep re sent value 31 hex;
p
2
rep re sent value range 00 to FF hex;
p
3
rep re sent value range 00 to FF hex)
Example
¬p1Bd¿ : ¬p = <Esc>p , the com mand
: 1 = p1 pa ram e ter value of 31 hex.
: B = p2 pa ram e ter value of 42 hex. for
: 132 msec pulse (66 x 2msec)
: d = p3 pa ram e ter value of 64 hex.
: A char ac ter is needed for com mand to
: be pro cessed.
980352-001 Rev.D B-3