Specifications

UI Command - Host Prompts/Codepage Inquiry
Description This com mand will cause the printer to en able
prompts to be sent to the host and it will send the
cur rently se lected codepage to the host through
the RS-232 port.
This com mand also dis ables soft ware flow con -
trol (XON/XOFF). Hard ware flow con trol is not
dis abled (DTR/CTS). To re start soft ware flow
con trol a re set (^@ com mand) or power must
be re cy cled.
Syntax UIp
1
,p
2
,p
3
The printer will send in for ma tion about the cur -
rently se lected code page back to the host in the
fol low ing for mat:
p
1
= Num ber of data bits.
p
2
= Code page.
p
3
= Coun try code.
The KDU au to mat i cally sends this com mand each
time power is ap plied.
Example:
UI¿
See Also: I and U com mands.
980352-001 Rev.D 3-107