Specifications

TT Command - Time Recall & Format Layout
Description Use this com mand to de fine the time for mat and
print time data. The TT vari able is in serted
within a Text or Bar Code com mand's DATA
pa ram e ter to print the time.
This com mand works only in print ers equipped with
the Real Time Clock (RTC) time and date op tion.
Syntax TTp
1
[|p
2
|p
3
][+]
Parameters P
1
, P
2
, P
3
= h, m, or s
These pa ram e ters de scribe the for mat of
the time dis play.
• At lease one pa ram e ter must be sup plied.
• Each pa ram e ter can be any of the val ues h,
m, or s and are de scribed be low.
Value De scrip tion
h
Hours displayed as 2 digits (e.g. 01)
m
Minutes displayed as 2 digits (e.g. 15)
s
Seconds displayed as 2 digits (e.g. 00)
[+] = En able 12 Hour clock for mat
Ap pending a + to the end of the com -
mand string se lects 12 hour clock mode.
The times will dis play with an “AM” or
“PM” in di ca tor. De fault (no +) = 24
hour clock mode
| = Sep a ra tor char ac ter
The sep a ra tor may be any ASCII char -
ac ter value be tween 032 and 063. The
sep a ra tor char ac ter is printed be tween
the re sults of each of the sup plied pa -
ram e ters.
Power-Up De fault For mat - h:m:s
Examples: If the cur rent time is 1:25 p.m.:
TTh:m:s+¿ : 01:25:00
TTh,m¿ : 13,25
TTh+¿ : 01 PM
3-100 980352-001 Rev.D