User`s manual

Features Line Mode in flash based printers is similar in
operation to the early model LP Series printer
which used the EPL1 programming language.
Line mode only approximates EPL1 printed
data and commands.
Line Mode features include:
❏
ASCII based command language.
❏
Immediate print and execution of a single
line of text or command data.
❏
Support for 10 standard bar codes.
❏
Two (2) resident fonts:
Out of Box Font: 14 by 22 dots (CCSET1)
and 10 by 18 dots (CCSET3) bit mapped
fonts. These fonts are part of EPL1 emulation
soft font set (v,w,x,y,z) preloaded into the
printer at time of shipment.
Base Default Font: 14 by 24 dots (Font 4)
and 10 by 16 dot (Font 2) bit mapped fonts.
❏ Print and command buffering.
980353-001 Rev.B 1-3