User`s manual

Appendix C
Modifying Your
Printer For EPL1
Compatibility
The Line Mode printing language is designed to
be command compatible with EPL1 program-
ming language. The printer character sets used
for printing are the basic differences between
the ELP flash based Line Mode printer and the
EPL1 LP series printer (i.e. LP2022, LP2042,
etc.).
ELP1 printers had a character sets for font 1
(CCSET 1) of 14 by 22 dots and font 2 (CCSET
4) that was 5 by 7 dots. See the A command
(page 3-3) for the default Line Mode fonts. The
EPL1 character sets can be installed in the
printer prior to switching to Line Mode and us
-
ing the printer Font Downloader utility.
The printer automatically performs the func
-
tions of the Top-of-form (Qnnn) command for
labels less than 2 inches long and the Extra Feed
(On) command for label taken sensing.
The printer does not support the Print Line
Command (L). Lines can be printed with the G,
g and H graphic print commands.
980353-001 Rev.B C-1