User`s manual

p Command - Print Buffer 1-999 times
Description Use this command to print 1 to 999 batch forms
or labels from commands and data previously
stored in the printer's command buffer.
The printer can print one or more forms or la
-
bels that have been stored in the printer's com
-
mand buffer as a single "batch". The "batch" of
forms or labels are then printed 1 to 999 times
as set per p
1
parameter of this command.
Syntax
¬pp
1
¿
Parameters p
1
= Sets the number of batch forms or labels
to print.
Range: 001 - 999
The p command must be terminated with a
Line Feed (LF) character. As an alternate
method, both the Carriage Return (CR) or Car-
riage Return Line Feed (CR/LF) combination
may be used.
Line Mode Operational Command Difference
- The equivalent ELP1 p command automatically
prints a 100 labels when the p
1
parameter is set to
001 through 099.
980353-001 Rev.B 3-27