User`s manual

P Command - Print Buffer 1-99 times
Description Use this command to print 1 to 99 batch forms
or labels from commands and data previously
stored in the printer's command buffer.
The printer can print one or more forms or la
-
bels that have been stored in the printer's com
-
mand buffer as a single "batch". The "batch" of
forms or labels are then printed 1 to 99 times as
set per p
1
parameter of this command.
Syntax
¬Pp
1
Parameters p
1
= Sets the number of batch forms or labels
to print.
Range: 00 - 99
The P command does not need to be termi-
nated with a Line Feed (LF) character or alter-
nately the Carriage Return (CR) or Carriage
Return Line Feed (CR/LF) combination. If the
print (P) command string is terminated immedi-
ately following the command, the top of form
will be move down one line on the next label fol-
lowing the completion of the batch print rou-
tine.
3-26 980353-001 Rev.B