User`s manual

M Command - Left Margin
Description Use this command to adjust the Left Margin.
By default, the Line Mode printer's outside mar
-
gins are set to match the maximum printable
area for the largest typical label media sup
-
ported by that printer.
Syntax
¬Mp
1
Parameters p
1
= Additional margin in millimeters.
Range: 00 - 99
Default: 03 (3mm)
1 millimeter = 0.040" = 8 dots
Do not set 2 inch printers to have mar-
gin values of greater than 49mm.
The margin command can not be applied to a
line of print after print data (text, bar codes, or
graphics) has proceeded it in a line.
The left margin parameter(M) is displayed on
the Dump Mode Printout and has a range of
M00 to M99.
Printable Area = 1-2 mm margin on all sides.
Printing outside of the "printable" area may
damage or shorten the print head's life.
Example:
¬M05¿:set a 5mm left margin
3-22 980353-001 Rev.B