User`s manual

B Command - Begin Command Buffer
Description Use this command to batch print labels or mini
-
mize the affects of host system delays.
Command buffering allows:
•
Assembly of a series of line print commands
(text, bar codes, etc.) for print.
•
Buffered printing treats the print operation as
a single print routine. and will print without
starting and stopping between line print oper
-
ations.
Syntax
¬B
Parameters
None
Default: Command Buffering Off
Use the command with the E command, End
Command Buffer.
Command Buffering
Rules
❏ Do not use printer configuration and control
commands (speed, mode changes, density,
etc.) within command buffer data strings.
❏ Line, text and bar code control commands
are allowed within the command buffer data
strings.
❏
Printing with the buffer mode will automati
-
cally assert a form feed at the end of buffer.
To disable this feature, use the N command,
Form Feed control, without any parameters.
❏
The printer will automatically backup to top
of form (label) when buffer printing a label.
The R command can not be used in buffered
print operations.
980353-001 Rev.B 3-7