User`s manual

A Command - Text/Bar Code Size
p
2
= Vertical size (multiplier).
Sets Text and Bar Code height.
Values: 1, 2, 3, 4, 5, 6, 7 & 8
Default: 1
Font
Per
Character
Line Height as Set by p
2
12345678
CCSET1
& Font 4*
Dots
26 52 78 104 130 156 182 208
Millimeters
3.25 6.5 9.75 13 16.25 19.5 22.75 26
CCSET3
Dots
24 48 72 96 120 144 168 192
Millimeters
3 6 9 12 15 18 21 24
Lines Per
Inch
8.4 4.2 2.8 2.1 1.6 1.4 1.2 1
Font 2*
Dots
26 52 78 104 130 156 182 208
Millimeters
3.25 6.5 9.75 13 16.25 19.5 22.75 26
Lines Per
Inch
7.8 3.9 2.6 1.9 1.5 1.3 1.1 0.97
❏ All text and bar codes will be printed at the
size selected by this command until a new
size is selected.
❏
The printer only supports a single line height
setting per line.
3-4 980326-001 Rev.A