User`s manual

A Command - Text/Bar Code Size
Description Use this command to set character and bar code
height, as well as, character width. This com
-
mand controls the default font for the printer.
Out of Box Font: 14 by 22 dots (CCSET1)
and 10 by 18 dots (CCSET3) bit mapped fonts.
These fonts are part of EPL1 emulation soft font
set (v,w,x,y,z) preloaded into the printer at time
of shipment.
Base Default Font: 14 by 24 dots (Font 4)
and 10 by 16 dot (Font 2) bit mapped fonts.
The base default fonts will be used if the soft
fonts are deleted or inactivated with EPL2 pro
-
gramming (in EPL2, page mode).
See Appendix C for information on controlling
line mode font sets.
Syntax
¬Ap
1
p
2
Parameters p
1
= Horizontal size control and font set se-
lection.
Sets the width of Text character, only.
Values: 1, 2, 3, 4, 5, 6, & 7
Default: 1
Model Font
Characters
Per
p
1
(width multiplier)
1
(x1)
2
(x2)
3
(x3)
4
(x4)
5
(x1)
6
(x2)
7
(x3)
2443
2844
CCSET1
& Font 4 *
Inch (cpi) 7 3.5 2.25 1.75
N/A
Line 52 26 17 13
CCSET3
& Font 2 *
Inch (cpi)
N/A
16.9 8.46 5.64
Line 69 34 23
2722
2824
CCSET1
& Font 4*
Inch (cpi) 7 3.5 2.25 1.75
Line 28 14 9 7
CCSET3
& Font 2 *
Inch (cpi) 16.9 8.46 5.65
Line 37 18 12
980326-001 Rev.A 3-3