User`s manual

Command
Conventions
The manual uses the following typographic
conventions to describe commands.
Example
Description
¬ or Esc
Escape
Character,
ASCII value 27d (1Bh)
E or FF
Form Feed Character,
ASCII value 12d (0Ch)
 or LF
Line Feed Character,
ASCII value 10d (0Ah)
e or CR
Carriage Return Character,
ASCII value 13d (0Dh)
¿ or CR/LF
Carriage Return & Line Feed
A
Command - Commands are
typically a single character.
Some commands contain up to
four (4) characters.
p
1
p
2
p
3
Required parameters
(No delimiters)
[p
1
p
2
p
3
]
Optional parameters
(No delimiters)
DATA
Text or bar code data to be
printed.
This text should
®be on one line
The line-continuation character
(®) indicates that code contin
-
ued from one line to the next in
the manual should be typed all
on one line. Note: This is not
used to program the printer.
2-4 980353-001 Rev.B
←A p p DATA
12
↵
Command
Parameters
Data
Text/Bar Code Size
Command Name