User`s manual

O-18

UMAN-EN3

Cleaning the platen

Refer to Figure 6

Applies to printers configured for linered media only

• Open the printer by pressing the “Open” button on

the front of the unit.

• Swing the print head open.

• Use the cleaning pen or saturate a cotton swab with

alcohol.

• Clean the platen while rotating it to expose the entire

surface.

Note: It is not necessary to clean the platen on linerless

units. The platen material is self cleaning and will not

require constant maintenance.

“Open” button

Peeler Rollers

(linered units only)

Fig. 6 Cleaning the Encore 3

Peeler Bar

(linered

units only)

Platen

Label

Presence

Sensor

(optional)

Head

Bar/Gap

Sensor

✔