User`s manual

O-15
UMAN-EN3
No print (continued) c) Check cable to terminal
d) Invalid label format or
command structure — use
Hex Dump Mode for
troubleshooting.
Reduced battery life a) Check battery date code —
after charging: if one to two years old,
short life may be normal
aging.
b) Recondition battery.
c) Replace battery.
Error light flashing: a) No application: reload
program.
b) If using wireless
communications: normal
indication while data is
being received.
Error light always on: a) Check media is loaded and
print head is closed and
securely latched.
Skips labels: a) Check media for top of
form sense mark or label
gap.
b) Check print field has not
been exceeded on label.
c) Insure bar/gap sensor is
not blocked or
malfunctioning
Problem Corrective Action
continued