User`s manual

O-13
UMAN-EN3
INSTALLATION OF MEDIA WITHOUT PEELER
The Encore 3 can print on conventional journal stock or
print continuous batches of labels without using the
peeler. The following details media installation for units
not equipped with a peeler or when use of the peeler is
not desired.
Peeler not in use (Journal, linerless, or batch
quantities of labels)
1. Turn unit off.
2. Press and hold the “Open” button on the front of the
unit. Rotate the top back to reveal the paper compart-
ment
3. Remove the edge guide and install the paper roll on
the spindle. Lead the free end over the rubber roller
(platen). Paper should feed from the top of the paper
roll.
4. Slide the edge guide back over the spindle and
against the roll of media. Roll should be against the
inside wall of the paper compartment.
5. Close the top and insure it is securely latched before
beginning to print.