User`s manual

O-8
UMAN-EN3
Chargers
Listed below are the specifications for the Encore 3
chargers:
UCN72-4: (p/n series AC15482-tab)
(Part numbers will vary depending on specific country
of use. Consult factory for complete part numbers.)
This unit is designed to charge up to four batteries
simultaneously. Battery packs may be charged sepa-
rately or while plugged into the printer. Typical charge
time is 90 minutes. Switch selectable 110/220 V.A.C.
input voltage. Supplied with line cords compatible
with most international standards.
Do not attempt to charge batteries while printing. At-
tempting to print while charging batteries with the UCN72-
4 Charger can result in unreliable charging.
UCN72: (p/n series AT15244-tab)
(Part numbers will vary depending on specific country
of use. Consult factory for complete part numbers.)
UC72N is a wall mounted single charger with univer-
sal 110 to 230, 50-60 Hz. VAC input. Multiple plug
configurations comply with most international stan-
dards.
Do not attempt to charge batteries while printing. At-
tempting to print while charging batteries can result in
unreliable charging.