User`s manual

O-6
UMAN-EN3
CONTROLS
Keypad Functions
Feed Switch:
Advances media to
next label or sense
mark without printing.
On switch:
momentary on action
turns printer on
Off switch: turns
printer off.
Power Light:
Indicates
Printer is
turned on
Status Light: Steady
light indicates printer is
either out of media, or
head release latch is
open.
Flashing during data
transmission between
host and printer
indicates normal
wireless operation.
Low Battery Light:
Flashes when battery is
near its shut off voltage.
Steady light indicates
battery must be
recharged or replaced.
Self Test
The Encore 3 can perform a self test which will print a
line of interlocking “x” characters to insure all elements of
the print head are working, and then print out the version
of software loaded in the printer. Refer to the Trouble-
shooting section for more details on interpreting the self-
test.
The self test is activated by the following key sequence:
1. Press the "FEED" key
2. While still holding down the "FEED" key, turn on
the printer by pressing and releasing the "ON" key.
3. Release the "FEED" key
The Encore 3 will remain on after running the self test.
Fig. 2 Encore 3 Controls