EM220II Mobile Printer User’s Manual P1007752-028 Rev. 1.
EM220II Table of Contents ※ Manual Information & Usage Precautions ························································7 1. Content Confirmation ···················································································14 2. Product Part Names ·····················································································15 3.
EM220II ■ Proprietary Statements This manual contains proprietary information of Zebra Technologies Corporation. It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the expressed written permission of Zebra Technologies Corporation.
EM220II Canadian Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. “IC:” before the equipment certification number signifies that the Industry Canada technical specifications were met. It does not guarantee that the certified product will operate to the user’s satisfaction.
EM220II Copyrights The copyrights in this manual and the label print engine described therein are owned by Zebra Technologies Corporation. Unauthorized reproduction of this manual or the software in the label print engine may result in imprisonment of up to one year and fines of up to $10,000 (17 U.S.C.506). Copyright violators may be subject to civil liability. This product may contain ZPL® , ZPL II® , and ZebraLinktm programs; Element Energy Equalizer® Circuit; E3® ; and AGFA fonts. Software © ZIH Corp.
EM220II ■ Introduction to the EM Series Thank you for choosing the EM220II Mobile Printer. Zebra’s ultra-small EM220II mobile printer delivers convenient receipt printing wherever you need it. The EM220II combines optional Bluetooth® 3.0 wireless connectivity and magnetic card reader with straightforward operation for simple mobile receipt printing and credit card transactions. This user’s guide gives you the information you will need to operate the EM220II series printer.
EM220II ■ Manual Information ※ Manual Information & Usage Precautions This user’s manual contains basic information for product usage as well as for emergency measures that may be required when using the EM220II printer. ※ For additional information on the EM220II, please refer to the following supplemental manuals: 1. Windows CE Module Program Manual This manual provides information on the dll files required for Windows CE application program development. 2.
EM220II ■ Safety Precautions When using the EM220II printer, please follow the recommended safety regulations provided below. Warning Violating the following instructions may cause serious injury. 1. Do not plug several products in one multi-outlet; this can provoke over-heating and a fire. • If the plug is wet or dirty, wipe it before usage. • If the plug does not fit perfectly with the outlet, do not force it in. • Be sure to use only standard multi-plug outlets. 2.
EM220II Caution Violating the following instructions may cause injury to the user or damage the printer. 1. If you observe smoke, odor or noise from the printer, unplug it before taking the following measures: • Turn off the printer and unplug the unit from the electrical outlet. • Contact an authorized Zebra Technologies service provider for repair. 2. Keep the packet of desiccant material (silica gel) out of children’s reach. 3.
EM220II ■ Battery Safety Precautions Make sure you review the user manual carefully prior to product use. Neglecting to follow the instructions may result in overheating of the battery, combustion, explosion, damage and/or decline in performance and product life. Danger 1. Do not allow liquids to enter or leak into the battery interior.
EM220II 9. Do not pierce the battery with a sharp object, or hit it with a heavy object. Avoid accidental short circuiting of any battery. Allowing battery terminals to contact conductive material will create a short circuit which could cause burns and other injuries or could start a fire. The battery may rupture or become warped, causing short circuits that may result in battery overheating, combustion, and/or explosion. 10. Do not solder the battery directly.
EM220II Caution 1. Do not use or leave the battery in a location exposed to high temperatures or intense direct sunlight. Doing so can cause battery overheating and/or combustion. In addition, battery performance and product life may be reduced. 2. The battery contains a safety mechanism to prevent danger. Do not use the battery in a location that is prone to static electricity (above the amount covered by the manufacturer’s product warranty).
EM220II Recommended 1. Review the user manual for instructions regarding insertion and removal of the battery from the printer. 2. The battery ships partially charged. You must charge the battery fully before using the printer for the first time. To charge the battery, use the exclusive charger provided with your printer. 3. To avoid improper use of the battery, review the product user manual carefully. 4. Do not charge the battery beyond the normal charging time indicated in the user manual. 5.
EM220II 1. Content Confirmation Contact the dealer from which the purchase was made if any item is damaged and/or missing. EM220II Battery Battery Charger Paper Power Cord Belt Strap CD Registration Card ※ Optional items Vehicle Holder Shoulder Strap Belt Clip Case Cigarette Lighter Jack Charger Protective Case EM Series Quad Cradle Rev. 1.
EM220II 2. Product Part Names • Front Paper Cover Power Button Paper Feed Button Open Button MSR Cover • Rear Hole for mounting belt strap /belt Strap Battery Interface Cap Cable Connection Power Connection Rev. 1.
EM220II 3. Installation & Usage 3-1 Battery Installation 1) Insert the battery on the rear side of the printer, aligning the battery hook properly. 2) Push the battery into the slot until a snapping sound is heard. NOTE As the battery is not charged at the time of purchase, charge the battery prior to product use. (Use the battery charger and/or the optional battery cradle.) 3-2 Battery Charging 3-2-1 Battery Charging Usage 1) Turn off the printer power.
EM220II 3-2-2 Battery Cradle (Optional) Usage ③ 1) Connect the power cord② to the battery charger ①. ④ 2) Connect the battery charger ① to the power connector of the battery cradle ③. ③ ① ② 3) Plug the power cord ② into an electrical outlet. 4) Insert the battery ④ into the battery cradle ③ until a snapping sound is heard. 3-2-3 Cigarette Lighter Jack Charger (Optional) Usage 1) Turn off the power to the printer. 2) Connect the cigarette lighter jack charger ① to your car’s cigarette lighter jack.
EM220II 3-2-4 Single Cradle (Optional) Usage 1) Turn the printer off. 2) Slide the printer in the Single Cradle as shown in the picture. 3) Push the printer in until a clicking sound is heard. 4) Charging will begin when the printer is installed. 5) Pull out the printer to separate it. CAUTION Please be sure to use the battery with external power contacts.
EM220II 3-2-5-2 Charging Battery (Printer) 1) Fasten batteries via the battery hooks into the Quad Charger as shown above. 2) Push the battery in until a snapping sound is emitted. 3) Charging begins as soon as the battery is completely inserted. Batteries are charged to 8.4VDC, 0.8A. 4) Push the hook and pull up to extract the battery. 1) Turn the printer off. 2) Slide the printer in the Quad Cradle as shown in the picture. 3) Push the printer in until a clicking sound is heard.
EM220II 3-3 Paper Installation 1) Press the Open button to open the paper cover. 2) Insert the paper as shown in the image. (Remove any remaining core of a fully used paper roll.) 3) Ensure that you align the paper correctly. 4) Pull the paper out as shown in the image and close the paper cover. 5) Tear off any excess paper in the direction of the side of the printer. Rev. 1.
EM220II 3-4 Belt Strap Usage 1) Insert the belt strap screw into the belt strap hole. Belt Strap 2) Use a coin to tighten the belt strap screw as shown in the image. Coin Belt 3) Undo the belt strap Velcro. 4) Fasten the belt strap to a belt. 5) Close the Velcro as shown in the image. Belt Rev. 1.
EM220II 3-5 Belt Clip (Optional) Usage 1) Insert the screw of the belt clip to the belt clip mounting hole. Coin Belt Clip 2) Fasten the screw of the belt clip with an object like a coin as shown in the picture. (Be careful to fasten in the correct direction.) 3) Insert the clip to the belt. Belt Rev. 1.
EM220II 3-6 Leather Case (Optional) Usage 1) Undo the Velcro. 2) Place the printer into the leather case following the direction shown in the image. 3) Close the Velcro. 4) Affix to a belt using the clip at the rear of the case. Belt NOTE The clip on the leather case can be rotated two stages by 30° per stage (maximum 60°) Rev. 1.
EM220II 3-7 Protective Case (Optional) Usage 1) Open its top cover. 2) Insert your printer into the protective case as shown in the figure on the left. 3) Close the Velcro. 4) Attach it to the belt using the clip on the back of the protective case. Belt 5) Open the paper discharger when using the printer as shown in the figure. Belt Note The clip of the protective case can be rotated in two steps of 30° for each step (up to 60°) Rev. 1.
EM220II 3-8 Vehicle Holder (Optional) Usage 1) Assemble the vehicle holder to the mount. 2) Adjust the vehicle mount properly, put the suction plate close to the glass, and pull the level to fix the position. (Use the disk pad to mount it on the dash board) 3) Slide the printer in the vehicle holder completely as shown in the picture. Rev. 1.
EM220II 3-9 Control Panel Usage • Power Button This button is used to turn the printer on and off. When the printer is off, pressing this button for approximately 2 seconds will turn the power on. When the printer is on, pressing this button for approximately 2 seconds will turn the power off. • Paper Feed Button Paper output can be done manually by pressing this button. In addition, self-testing and Hexadecimal Dumping can be done. 1) Refer to “4. Self-Test” for self-test information.
EM220II 3-10 MSR Usage 1) Press the MSR cover to open. 2) Insert the card as shown in the image and swipe in the direction of the arrow. (can be done in both directions) 3) When finished using, press the MSR cover to close it. NOTE If the card does not register, first check to see if it is properly aligned. When swiping the card, the recommended swiping speed is 100 ~ 1200 mm/sec. 4.
EM220II • Self-Test Printout Sample(For Bluetooth) Firmware version : B02.00 STDa 012813 Butter Capacity : 128K Bytes Print Density : 100% Serial Interface - Baud rate : 115200 bps Data bits : 8 bits Parity : None Stop bit : 1 bit or more Handshaking : DTR/DSR Default Codepage : PC437 Print Speed : Max.
EM220II • Self-Test Printout Sample (For Wireless LAN) Firmware version : B02.00 STDa 012813 Butter Capacity : 128K Bytes Print Density : 100% Serial Interface - Baud rate : 115200 bps Data bits : 8 bits Parity : None Stop bit : 1 bit or more Handshaking : DTR/DSR Default Codepage : PC437 Print Speed : Max.
EM220II 5. Label Printing Function 5-1 Label Function Setting Label paper and black mark paper available at the label mode. • Setting Operations 1) Turn on the printer power. 2) Open the paper cover and press and hold down the paper feed button for longer than two seconds. 3) After the buzzer tone is emitted, insert paper and close the cover. 4) Repeat the steps above to return to receipt mode. • Setting Via Memory Switch - Please refer to the memory switch changing section of the Commands Manual.
EM220II 6. iOS MFi Mode Setting (Optional) This product supports MFi mode that enables Bluetooth communication with iOS devices. (Applicable to MFi support models only) • How to enable and disable MFi mode 1) Turn on the printer. 2) Open the paper cover and press the power button and paper feed button at the same time for longer than two seconds. 3) Close the cover when the buzzer sound is heard. 4) Reboot the printer when the following message is printed.
EM220II 7. Peripherals Connection This product can communicate with other devices via Bluetooth communication and cable. 7-1 Bluetooth & Wireless LAN Connection 1) The printer can be connected to devices equipped with Bluetooth communication capacity (PDAs, PCs, etc.). 2) Use the Bluetooth connection function supported by the device to connect to the printer.
EM220II 8. Printer Cleaning If the interior of the printer is dusty, print quality can decline. In such a case, follow the instructions below to clean the printer. CAUTION • Make sure to turn the printer power off prior to cleaning. • The print head gets very hot during printing. Before cleaning the print head, turn the printer power off and wait approximately 10 minute before commencement. • When cleaning the print head, do not to touch the heated portion of the print head.
EM220II 9. Appendix 9-1 Specifications NOTE Printer specifications are subject to change without notice.
EM220II 9-2 Certification 1) WEEE (Waste Electrical and Electric Equipment) This mark shown on the product or its literature indicates that the corresponding item should not be discarded at the end of its working life with other household waste. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate marked items from other types of waste and recycle them responsibly to promote the sustained reuse of material resources.
EM220II Disposal Directions • Do not dispose of waste battery packs recklessly. • Do not burn or throw in fire to dispose of the battery pack. There is a risk of fire and/or explosion. • How to dispose of battery packs may vary depending on countries or regions. Dispose of it in the correct method. Recommendation for Charging • Do not charge your battery pack in a way not mentioned in the instruction manual. Doing so may result in fire or explosion.
www.zebra.com Zebra Technologies International, LLC Zebra Technologies Europe Limited 333 Corporate Woods Parkway Dukes Meadow Vernon Hills, Illinois 60061, 3109 USA Millboard Road Phone: +1.847.634.6700 Bourne End Toll-Free: +1.800.423.0422 Buckinghamshire, SL8 5XF, UK Fax: +1.847.913.
