Service manual

Rev. 1.04
- 40 -
EM 220
Mobile Printer Service Manual
5-1-5 Assy-mechanism
1
1
2
2
2
2
3
3
4
4
4
4
5
5
6
6
6
6
6
6
7
7
10
10
9
9
8
8
11
11
12
12
13
13
13
13
14
14
16
16
17
17
18
18
19
19
20
20
21
21
22
22
23
23
23
23
24
24
25
25
25
25
26
26
12
12
15
15
Part name Assembly procedure
(1) Basket paper
(2) Screw
(3) F-cutter manual
(4) Screw
(5) Jumper cable
(6) Screw
(7) F-gear train
(8) Washer
(9) Gear re-A
(10) Gear re-B
(11) Gear idle
(12)(13)(14) Screw
(15) Assy-sub-FPC-main
(16) Arm locking-L
(17) SP-locking-L
(18) SH-locking
(19) Arm locking-R
(20) SP-locking-R
(21) Screw
(22) F-brkt motor
(23) SP-TPH
(24) Assy-TPH
(25) Bush-bracket
(26) Lable-hot
1) Loosen two (2) Screw from the (1) Basket paper and then remove the
(3) F-cutter manual.
2) Loosen two (4) Screw and then remove the (5) Jumper cable.
3) Loosen three (6) Screw and then remove the (7) F-gear train.
4) Remove the (8) Washer, the (9) Gear re-A, the (10) Gear re-B and the
(11) Gear idle.
5) Loosen five (12)(13)(14) Screw and then remove the (15) Assy-sub-
FPC-main.
6) Remove the (16) Arm locking-L and then the (17) SP-locking-L.
7) Remove the (18) SH-locking and then remove the (19) Arm locking-R
and the (20) SP-locking-R.
8) Loosen the (21) Screw and the remove the (22) F-brkt motor and two
(23) SP-TPH.
9) Remove the
(24) Assy-TPH and then remove two (25) Bush-bracket.
10) Remove the (26) Label-hot.