Service manual

Rev. 1.04
- 10 -
EM 220
Mobile Printer Service Manual
2-2-2 Battery Holder (Optional) Usage
1) Connect the power cord to the battery charger ② . ①
2) Connect the battery charger to the power ①
connector of the battery holder .③
3) Plug the power cord into an electrical outlet.②
4) Insert the battery into the battery holder until ④③
a snapping sound is heard.
2-2-3 EM Series Quad Charger (Optional) Usage
2-2-3-1 Connecting the cables
1) Connect the power cord to the adaptor, and
Connect the adaptor to the power connector of the
Quad Charger.
2) Plug the power cord into a power Outlet. Input
power is 100 ~ 240VAC, 50/60Hz, 1.4A.
NOTE
When power is supplied, the amber and green LED
turn on for two seconds.
WARNING
Use only designated AC/DC adaptor (12VDC, 5A)
①
②
③
④