User`s manual

28
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
P205 & P210i Plastic Card Printer
3 • Lift the cartridge lid up and remove the Adhesive Cleaning Roller from the cartridge and discard.
4 •Carefully peel off wrapper from new Cleaning Roller.
5 •Install new Cleaning Roller into the Cartridge*. To avoid contamination, always hold the Cleaning Roller assem-
bly by the ends.
6 •Replace Cleaning Cartridge into printer following the rail guides. Ensure the assembly locks in place.
DONOTtouch the roller surface that contacts the cards.
7 • Re-insert the Ribbon Cartridge
8 • Close Cover by pushing firmly down on both sides.
¨See Appendix C for replacement Cleaning Rollers.
