User`s manual

IV Command - Print Clear Veneer
Description This command serves either to print the entire ad
-
dressable image buffer or to reverse print with the
clear veneer or any image data (line, rectangles,
graphics, text, etc.) previously stored in a mono
-
chrome image buffer.
After printing is complete, the card may be ejected
to the output tray (hopper) or repositioned to print
more ribbon panels for models that support the
hologram, lamination, or the duplex operations.
The ribbon panels advance during printing such
that completion of printing from one ribbon panel
leaves the ribbon ready to print the next panel.
Syntax IV{p1}↵
Parameters p1 = Optional Command Parameter
Print Options
Value Description
None
Prints 100% of image buffer with the clear
veneer material and ejects card.
1
Prints the inverse of the image buffer data
and ejects card.
10
Prints card and returns the card to the print
ready position.
11
Print inverse of image buffer and return card
to print ready position.
30
Print card, but leave in place (facilitates
advancing card in Module 1 in preparation for
not BUSY in Module 2 (P500s and P600s).
31
Similar to 30, but print inverse image.
980081-001 Rev. F 2-51
P3xx M
•
•
•
•
P3xx C
P4xx
P500
P600
Max