User`s manual

B/vB Command - Write Bar Code
Description This command is used to print standard bar codes.
See Appendix A for character maps and unique pa
-
rameter settings for each bar code type.
Syntax
B p1 p2 p3 p4 p5 p6 p7 p8data↵
Parameters p1 = Horizontal (X-axis) start position, in dots
p2 = Vertical (Y-axis) start position, in dots.
p3 = Rotation:
Value Description Origin
0 No rotation Lower Left
1 90 degrees Lower Left
2 180 degrees Lower Left
3 270 degrees Lower Left
4 No rotation Centered
5 90 degrees Centered
6 180 degrees Centered
7 270 degrees Centered
p4= Bar Code selection - See Appendix A
Value Bar Code Type
0
Code 39 (3 of 9) (alphanumeric)
1
2/5 Interleaved (Numeric, Even No count.)
2
2/5 Industrial (Numeric)
3
EAN8 (Numeric, 7 digits encoded)
4
EAN13 (Numeric, 12 digits encoded)
5
UPC - A (Numeric, 12 digits encoded)
6
Reserved for MONARCH
7
Code 128 C without check digits *
(Numeric Only, Even Number Printed)
107
Code 128 C with check digits *
(Numeric Only, Even Number Printed)
8
Code 128 B without check digits *
(alphanumeric)
108
Code 128 B with check digits *
(alphanumeric)
* -Not supported by some Monochrome printer models
2-46 980081-001 Rev. F
• P3xx M
•
•
•
•
•
P3xx C
P4xx
P500
P600
Max