User`s manual

C/vC Command - Write Box (Monochrome)
Description Writes a hollow-box rectangle graphic to a mono
-
chrome image buffer by defining the height, width,
line thickness (width) and origin. The “C”command
writes to the buffer used for Resin printing. The
“vC” command writes to a buffer used for Varnish
printing.
Syntax
C p1 p2 p3 p4 p5 p6↵

vC p1 p2 p3 p4 p5 p6↵
Parameters p1 = Horizontal (X-axis) start position in dots.
p2 = Vertical (Y-axis) start position in dots.
p3 = Horizontal (X-axis) width of graphic line in dots (i.e. hori
-
zontal lines).
p4 = Vertical (Y-axis) height of graphic line in dots.
p5 = Thickness/width of diagonal graphic line in dots.
p6 = Graphic Mode
Value Description
0
Reverse Bit-map - Clear print area and load
reverse bit-map image
1
Standard Bit-map - Clear print area and
load bit-map image
2
Merge Bit-map - Overwrite background
bit-map image with printable dot locations
leaving non-printing dot locations alone.
2-42 980081-001 Rev. F
• P3xx M
•
•
•
•
•
P3xx C
P4xx
P500
P600
Max
0
D
O
T
S
LINES
Hollow Box
Image Origin
P5
Figure 2-9
Hollow Box
Image Positioning