User`s manual

P/vP Commands - Write Dot (Monochrome)
Description Writes a single monochrome dot to a monochrome
image buffer. The “ P”command writes to the buffer
used for Resin printing. The vP command writes to
a buffer used for Varnish printing.
Syntax P p1 p2 p3↵
Parameters p1 = Horizontal (X-axis) start position (X) in dots.
p2 = Vertical (Y-axis) start position (Y) in dots.
p3 = Graphic Mode:
Value Description
0
Reverse Bit-map - Clear print area
and load reverse bit-map image
1
Standard Bit-map - Clear print area
and load bit-map image
2
Merge Bit-map - Overwrite
background bit-map image with
printable dot locations leaving
non-printing dot locations alone.
2-40 980081-001 Rev. F
• P3xx M
•
•
•
•
•
P3xx C
P4xx
P500
P600
Max