User`s manual

G/vG Command - Initialize Monochrome Graphic
(B/W)
Description Initializes Monochrome graphic area using height,
width and position.
Syntax G p1 p2 p3 p4 p5 p6↵
Parameters p1 = Horizontal (X-axis) start position (X) in dots.
p2 = Vertical (Y-axis) start position (Y) in dots.
p3 = Download Mode for Graphic (Bit-map):
When using bytes, the byte count must be rounded up
-
ward to the next nearest whole byte.
Example:
25 dots = 3 bytes + 1 dot = 4 bytes
Value Data Description
0 Byte
Standard
1 Byte
Standard with Checksum
2 Byte
Compressed
3 Byte
Compressed with Checksum
10 Dot
Standard
11 Dot
Standard with Checksum
12 Dot
Compressed
13 Dot
Compressed with Checksum
p4= Vertical (Y-axis) height of graphic in bytes.
Round up the number of bytes loading in multiples of 8
bits (i.e. Monochrome dots).
p5 = Horizontal (X-axis) width of graphic in dots (i.e. horizon
-
tal lines).
p6 = Graphic Mode:
Value Description
0
Reverse Bit-map - Clear print area
and load reverse bit-map image
1
Standard Bit-map - Clear print area
and load bit-map image
2
Merge Bit-map - Overwrite
background bit-map image with
printable dot locations leaving
non-printing dot locations alone.
980081-001 Rev. F 2-35
• P3xx M
•
•
•
•
•
P3xx C
P4xx
P500
P600
Max