User`s manual

CLNCARD Command - Establish Cleaning Card
Sequence
Allows settings for a time-to-clean alert and the cy
-
cling of cleaning card in card path.
Note that this command only applies to P310,
P420, and Max3300 printers.
Syntax CLNCARDp1p2↵
Parameters p1 = Ribbon Panel Count to Cleaning Notification (Default =
5000)
p2 = Number of Cleaning Card Passes Through Printer
(Default = 5)
2-28 980081-001 Rev. F
P3xx M
•
•
•
P3xx C
P4xx
P500
P600
Max