User`s manual

MO Command - Exit Card To Output Tray
Description For P3xx and P400:
Moves and exits a single card from any position
except the Input Hopper to the output tray.
For P500:
Sent to Module 1, ejects a card from anywhere in
printer except the Input Hopper to the Output Tray.
Sent to Module 2, ejects a card in Module 2 to the
Output Tray. If no card is present, printer responds
ACK.
For P600:
Sent to Module 1, moves card to Module 2 from any
position in Module 1, except the Input Hopper.
Sent to Module 2, moves card to Output Tray from
any position in Module 2. If no card is present,
printer responds ACK.
For Max:
Sent before an MF command, sends Clear Card to
the Card Assembly Station. Sent after an MF com-
mand, sends a White Card to the Card Assembly
Station, and if needed, sends the assembled cards
to the Laminator and Die Cutter module.
Syntax MO↵
Parameters None
980081-001 Rev. F 2-21
• P3xx M
•
•
•
•
•
P3xx C
P4xx
P500
P600
Max