User`s manual

ME Command - Exit Card To Output Tray
Description For P300, P310 and P400, moves and exits a single
card from any position to the output tray.
For P500 and P600, moves and exits a single card
from any position except the Feeder to the Output
Tray.
Sent to Module 1, ejects a card anywhere in the card
Module.
Sent to Module 2, ejects any card present in Module
2. If no card is present, a Ribbon End or Card-Feed
error occurs.
Syntax ME{p1}↵
Parameters p1 = Number of cards to pass through printer.
980081-001 Rev. F 2-19
•
•
•
•
•
P3xx C
P4xx
P500
P600
Max
P3xx M