User`s manual

!R Command - Print Head Resistance
Description Enters manufacture’s average resistance that ap
-
pears on the print head label. Note that replacement
to a print head with 10-micron glass can produce
faint printing if not offset (typically from between
180 and 225 ohms). An offset that optimizes print
quality should be found.
Note: This setting interacts with the following com
-
mands:
+C Thermal Transfer Intensity
+$L Color Intensity
+$C Color Contrast
Syntax !Rp1↵
Parameters p1 = Resistance
Where:
p1 range = 1400~2350
Example In the following example, 1567 ohms is entered
based on the print head label.
!R1567↵
980081-001 Rev. F 2-15
• P3xx M
•
•
•
•
•
P3xx C
P4xx
P500
P600
Max