User`s manual

+EC Command - End of Print
Description Specifies a point, beyond which, no card printing
occurs. Print stations with associated Extended
Memory installed have storage for 1024 lines of im
-
aging, which exceeds the x-axis image area on the
cards.
The parameter for End of Print causes the print
head to raise at the end-of-card point, not the end of
data. If left down beyond the end of card, the print
head can shear the ribbon as the print head
abruptly drops below the surface of the card. Note
that higher values of p1 result in shortened line
counts.
Syntax +ECp1↵
Parameters p1 = line count for end-of-print
Where:
8 = default (standard)
0 = default (Max3000)
0~24=range
Example The following example sets the End of Print to 8 (the
default value).
+EC8↵
980081-001 Rev. F 2-13
• P3xx M
•
•
•
•
•
P3xx C
P4xx
P500
P600
Max