User`s manual

!V Command - Return Operational Parameter
Description Returns value for a selected parameter.
Note that this command only applies to Max3300
Printer and Laminator Modules.
Syntax !V{p1}↵
p1 = Requested Parameter
Where for Printer Module:
None = Return Black Printing Parameters
0 = Return Black Printing Parameters
1 = Return X Offset
2 = Return Y Offset
3 = Return Print Head Resistance
4 = Return X offset for Clear Card Material
5 = (Not Used)
6 = Card Layers Set (0 for 2; 1 for 3)
7 = Return First Layer Cut Offset
8 = Return Third Layer Cut Offset
For Laminator Module:
0 = Bottom Roller Temp. (Layer Configuration
Dependant)
1 = Die Cutter Offset (!CM 08)
2 = Lamination Speed (Layer Configuration
Dependant)
3 = Good Lamination Counter
4 = Error Counter
5 = Movement Speed
6 = Idle Time in Standby Mode
7 = Standby Mode Temp.
8 = Layer Configuration (0 for 2; 1 for 3)
9 = Top Roller Temp. Setting (Layer Configuration
Dependant)
980081-001 Rev. F 2-9
P3xx M
•
P3xx C
P4xx
P500
P600
Max