User`s manual

DO NOT print, veneer, or laminate over the mag
-
netic stripe or Smart Card contacts. This can impair
subsequent associated read and write operations
and must be controlled by the programming.
Batch Processing The “M” and “m” commands serve as command
linking operators. A string of linked commands may
execute one (1) time or multiple times. The “[” char
-
acter acts as delimiter for linked commands in the
associated syntax.
For the complete “M” command syntax, and an ex
-
ample, see M/m in the Command Reference,
Sample Card Figure 5-6 shows a printed card along with the com-
mands used.
980081-001 Rev. F 1-23



   
   
   
   
   
   
+RIB 4 Ribbon Type
+C 3 Thermal Intensity
F Clear Monochrome Buffer
B51260040241001TEST Write Bar Code
T51275400351Company Name, Incorporated Write Text
T200200010501FIRSTNAME WriteText
T200300010501LASTNAME WriteText
T200400010501ACCOUNT NUMBER Write Text
T65320710500Reversetext WriteText
¿
¿
¿
¿
¿
¿
¿
¿
¿
 L158097041 WriteLine¿
I Print Monochrome¿
Commands
Descriptions
Figure 1-6
Sample Monochrome
Card