User`s manual

3. Duplex - Flips the card over using the Card-Flip
Assembly, initiated by the ‘MF’ command.
4. Ready Smart Card - Positions a Smart Card
under the Smart Card Docking station with the con
-
tacts of a Smart Card chip engaged.
5. Encode Ready position - The card moves to a
position just prior to the magnetic encoding station
read/write head.
Ribbon
1. Reset Ribbon - Sets the ribbon panel to the first
panel (color - yellow panel) or cycles the continuous
color Monochrome ribbon.
2. Select Panel - Resets, then selects a specific rib
-
bon panel.
Card Handling
Process
The following outlines a recommended card han-
dling sequence.
1. Smart Card Programming - Option
2. Magnetically Encode Card - Option
3. Print Card
For color printing:
Yellow
Magenta
Cyan
Black
Clear Varnish or Hologram Transfer
4. Duplex - Flip Card - Option
5. Print Card Backside - Option
For color printing:
Yellow
Magenta
Cyan
Black
Clear Veneer
Hologram Lamination
6. Eject Card
1-22 980081-001 Rev. F