User`s manual

FOREWORD
This manual contains installation and operation information for the Eltron Series card printers
manufactured by Zebra Technologies Corporation, Camarillo, California.
RETURN MATERIALS AUTHORIZATION
Before returning any equipment to Zebra Technologies Corporation for in-warranty or
out-of-warranty repair, contact Repair Administration for a Return Materials Authorization (RMA)
number. Repack the equipment in the original packing material and mark the RMA number
clearly on the outside. Ship the equipment, freight prepaid, to the address listed below:
For U.S.A and Latin America:
Zebra Technologies Corporation
Eltron Card Printer Products
1001 Flynn Road
Camarillo, CA. 93021-8706. U.S.A.
Phone: [phone]
FAX: [phone]
Toll Free in US: [phone]
For Europe, Asia, and Pacific:
Zebra Technologies Corporation
Eltron Card Printer Products
Zone Indutrielle, Rue d'Amsterdam
44370 Varades, France
Phone: [phone]
FAX: [phone]
COPYRIGHT NOTICE
This document contains information proprietary to Zebra Technologies Corporation. This docu
-
ment and the information contained within is copyrighted by Zebra Technologies Corporation
and may not be duplicated in full or in part by any person without written approval from Zebra.
While every effort has been made to keep the information contained within current and accurate
as of the date of publication, no guarantee is given or implied that the document is error-free or
that it isaccurate with regard to any specification. Zebra reserves the right to make changes, for the
purpose of product improvement, at any time.
TRADEMARKS
Eltron is a trademark of Eltron International Incorporated. Windows and MS-DOS are registered
trademarks of Microsoft Corp. All other marks are trademarks or registered trademarks of their re
-
spective holders.
980081-001 Rev. F iii