User`s manual

Appendix E
This Appendix offers examples of Max Secure com-
mand sequences for the various ribbon types.
Note that for Max3000s the best sequence links
print commands using the “M” operator. For
Max3300s, data downloads alternated with print
commands takes advantage of a related capability
to overlap, and thereby, speed up these operations.
For error support, the firmware maintains two buff-
ers. The data and command series for printing stay
in a respective buffer until an associated card com
-
posite passes through all the Max Secure modules
error free. If an error occurs somewhere during the
process, the command and associated data remain
available, and the firmware initiates another card
printing automatically.
Imagine, for example, an error that occurs in the
Laminator while the Printer has begun another
card. Data associated with the error-producing card
would remain in place while printing continues on
the card next begun. Following print completion on
this card, another printing begins using the data re
-
tained for use to replicate the card that produced
the error.
980081-001 Rev. F E-1