User`s manual

Make a Card Flip pending in Module 2, and do not
wait for Ready + Error-Free status:
MF↵
Select Module 1 (INIT = 1)
Exit card from Module 1, and check for Ready +
Error-Free status:
MO↵
Select Module 2 (INIT = 0)
Wait for Module-2 ACK + Error-Free Status
Print Image Buffers using Link command, and do
not wait for Module 2 Ready + Error-Free status,
for example:
m1IS0[IS1[IS2[I[IVxx↵
Where:
xx = 30 (do not move after varnish)
xx = 31 (invert K for varnish and do not move after)
xx = 10 (return to print-ready after varnish)
xx = 11 (invert K for varnish, and return to print-ready)
Loop to Start
D-4 980081-001 Rev. F