User`s manual

Sample P600
Command Sequence
Start
At host, prepare an image for side-one of the card.
Before sending the image, check Module 1 for
Error-Free and Ready status.
Select Module 1 (INIT = 1)
Wait for Module-1 ACK + Error-Free Status
If necessary, correct error.
Download Yellow Buffer data to Module 1 and wait
for Ready + Error-Free status, for example:
GS0p1p2p3p4p5p6data↵
Download Magenta Buffer data to Module 1 and
wait for Ready + Error-Free status, for example:
GS1p1p2p3p4p5p6data↵
Download Cyan Buffer data to Module 1 and wait
for Ready + Error-Free status, for example:
GS2p1p2p3p4p5p6data↵
Download Black Buffer data to Module 1 and wait
for Ready + Error-Free status, for example:
Gp1p2p3p4p5p6data↵
If different from inverted black, download Varnish
buffer data to Module 1, and wait for Ready +
Error-Free status, for example:
vLp1p2p3p4p5↵
Print Image Buffers using Link command, and do
not wait for Module 1 Ready + Error-Free status,
for example:
m1IS0[IS1[IS2[I[IVxx↵
Where:
xx = 30 (do not move after varnish)
xx = 31 (invert K for varnish and do not move after)
xx = 10 (return to print-ready after varnish)
xx = 11 (invert K for varnish, and return to print-ready)
At host, prepare an image for side-two of the card.
D-2 980081-001 Rev. F