User`s manual

Change Track Density The &D command allows changes in the density of
a track. &D command changes occur to a given
track density without changing the related data for
-
mat or character set. See Command Reference &D,
page 2-69 for command details.
Changing Read
Configuration
The &CDER command serves to change the read
data format configuration. This command can con
-
figure a given track to:
·
Its ANSI/ISO data format.
·
Change it to another ANSI/ISO track format.
·
To allows forward or reverse data reads.
·
Change to “Raw” data format that has custom
track data format and data block encoding.
The &L read command needs to be configured to
read “Raw” (or hexadecimal) custom data.
Changing Write
Configurations
The &CDEW command allows changes to the read
data format configuration. This command can con-
figure a given track to:
·
Its ANSI/ISO data format.
·
Change it to another ANSI/ISO track format.
·
Change to “Raw” data format that has custom
track data format and data block encoding.
The &B read command needs to be configured to
store to write “Raw” (or hexadecimal) custom data.
C-6 980081-001 Rev. F