User`s manual

+DLAMI Command - Set Lamination Configura
-
tion (Continued)
Print KsO on both sides without lamination:
+DLAMI 1 0 Varnish enabled
IS 3 Print K (side 1)
IV 10 Print O (side 2) & return
MF Flip Card & return
+DLAMI 1 0 Varnish enabled
IS 3 Print K (side 2)
IV Print O (side 2) & eject
Examples Using
Monochrome
Ribbon
Print K and laminate side one:
+DLAMI 0 1 Laminate enabled (side-1 default)
I 10 Place at print ready
MF Flip Card & return
+DLAMI 0 0 Disable both varnish & laminate
I Print K, flip card, laminate & eject
On first side, print K and laminate. On second side
just print K:
+DLAMI 0 1 Laminate enabled (side-1 default)
I 10 Print K (side 1), & return
MF Flip Card & return
+DLAMI 1 0 Varnish enabled
I Print K, flip card, & eject
Print K on both sides without lamination:
+DLAMI 1 0 Varnish enabled
I 10 Print K & return
MF Flip Card & return
+DLAMI 0 0 Disable both varnish & laminate
I Print K & eject card
980081-001 Rev. F 2-97