User`s manual

+TC Command - Set Temperature
Description Sets amount of heat applied in transferring material
or die-cut panels from the Laminator Ribbon to the
cards.
P500 Syntax #1+TCp1↵
Max3000 Syntax #11+TCp1↵
Parameters p1 = Temperature (degrees C)
Where:
165 ≅ P500 Overlaminate
155 ≅ P500 Varnish
185 ≅ Max3000 Laminate
2-92 980081-001 Rev. F
P3xx M
•
•
P3xx C
P4xx
P500
P600
Max