User`s manual

+B Command - Serial Interface Rate
The card printer responds to commands (with data
or error codes) via the bi-directional serial interface
only. Printers with parallel interfaces cannot re
-
spond to this command, (other than flagging an er
-
ror). The card printer can operate with both
interfaces attached and communicating with the
printer.
Description This command changes the baud rate of printers
with serial interfaces.
Syntax +B{p1}↵
Parameters p1 = Serial Interface Baud Rate Options, as follows:
Select Baud Rate
0 9600 (Default)
1 19200
2 38400
3 57600
2-84 980081-001 Rev. F
• P3xx M
•
•
P3xx C
P4xx
P500
P600
Max