User`s manual

&C Command - Set Coercivity
Description This command sets the Encoder to record on either
High- or Low-Coercivity magnetic stripes.
Note: Recognition of this command requires an En
-
coder board that can change between high and low
coercivity.
Note: To send this command directly to the
Max3000 Encoder, use an #21 Initiation in
-
stead of just an Escape.
Syntax &Cp1
Parameters p1 = Coercivity
Where:
0 = Low
1 = High
980081-001 Rev. F 2-75
•
•
•
•
•
P3xx C
P4xx
P500
P600
Max
P3xx M