Declaration of Conformity

ManualsBrandsZebra ManualsElectronicsEC30 Enterprise Companion

REVIEW ONLY

EC30

Regulatory Guide

ZEBRA and the stylized Zebra head are trademarks of Zebra

Technologies Corporation, registered in many jurisdictions

worldwide. All other trademarks are the property of their respective

MN-003604-01 Rev. A - 7/19

Zebra Technologies | 3 Overlook Point | Lincolnshire, IL

60069 USA

www.zebra.com

Printed in China

Regulatory Information

This device is approved under Zebra Technologies

Corporation.

This guide applies to the following Model Number:

EC300K.

All Zebra devices are designed to be compliant with

the rules and regulations in locations they are sold

and will be labeled as required.

Local language translations are available at the

following website: www.zebra.com/support

Any changes or modifications to Zebra equipment,

not expressly approved by Zebra, could void the

user’s authority to operate the equipment.

Declared maximum operating temperature: 50°C.

CAUTION:

Only use Zebra approved and UL

Listed accessories, battery packs, and battery

chargers.

Do NOT attempt to charge damp/wet mobile

computers or batteries. All components must be

dry before connecting to an external power

source.

Bluetooth

Wireless Technology

This is an approved Bluetooth® product. For more

information or to view the End Product Listing,

please visit www.bluetooth.org/tpg/listings.cfm

Wireless Device Country

Approvals

Regulatory markings subject to certification are

applied to the device signifying the radio(s) is/are

approved for use in the following countries and

continents: United States, Canada, Japan, China,

South Korea, Australia, and Europe.

Please refer to the Declaration of Conformity (DoC)

for details of other country markings. This is

available at: www.zebra.com/doc

Note: Europe includes Austria, Belgium, Bulgaria,

Croatia, Czech Republic, Cyprus, Denmark,

Estonia, Finland, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia,

Liechtenstein, Lithuania, Luxembourg, Malta,

Netherlands, Norway, Poland, Portugal, Romania,

Slovak Republic, Slovenia, Spain, Sweden,

Switzerland, and the United Kingdom.

CAUTION: Operation of the device without reg-

ulatory approval is illegal.

Country Roaming

This device incorporates the International Roaming

feature (IEEE802.11d), which will ensure the

product operates on the correct channels for the

particular country of use.

Wi-Fi Direct

Operation is limited to the following channels/bands

as supported in the country of use:

• Channels 1 - 11 (2,412 - 2,462 MHz)

• Channels 36 - 48 (5,150 - 5,250 MHz)

• Channels 149 - 165 (5,745 - 5,825 MHz)

Frequency of Operation – FCC

and IC

5 GHz Only

Industry Canada Statement

CAUTION: The device for the band 5,150 -

5,250 MHz is only for indoor usage to reduce

potential for harmful interference to co-Chan-

nel mobile satellite systems. High power ra-

dars are allocated as primary users (meaning

they have priority) of 5,250 - 5,350 MHz and

5,650 - 5,850 MHz and these radars could

cause interference and/or damage to LE-LAN

devices.

AVERTISSEMENT: Le dispositive fonctionnant

dans la bande 5,150 - 5,250 MHz est réservé

uniquement pour une utilisation à l'intérieur

afin de réduire les risques de brouillage

préjudiciable aux systèmes de satellites

mobiles utilisant les mêmes canaux. Les

utilisateurs de radars de haute puissance sont

désignés utilisateurs principaux (c.-à-d., qu'ils

ont la priorité) pour les bands 5,250 - 5,350

MHz et 5,650 - 5,850 MHz et que ces radars

pourraient causer du brouillage et/ou des

dommages aux dispositifs LAN-EL.

2.4 GHz Only

The available channels for 802.11 operation in the

US are Channels 1 to 11. The range of channels is

limited by firmware.

Health and Safety

Recommendations

Ergonomic Recommendations

CAUTION: In order to avoid or minimize the po-

tential risk of ergonomic injury follow the rec-

ommendations below. Consult with your local

Health & Safety Manager to ensure that you

are adhering to your company's safety pro-

grams to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within

easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Warnings for Use of Wireless

Devices

CAUTION: Please observe all warning notices

with regard to the usage of wireless devices.

Wireless devices transmit radio frequency energy

and may affect medical electrical equipment.

Wireless devices should be switched off wherever

you are requested to do so in hospitals, clinics, or

healthcare facilities. These requests are designed

to prevent possible interference with sensitive

medical equipment.

Pacemakers

Pacemaker manufacturers recommended that a

minimum of 15 cm (6 inches) be maintained

between a handheld wireless device and a

pacemaker to avoid potential interference with the

pacemaker. These recommendations are consistent

with independent research and recommendations

by Wireless Technology Research.

Persons with Pacemakers:

• Should ALWAYS keep the device more than 15

cm (6 inches) from their pacemaker when

turned ON.

• Should not carry the device in a breast pocket.

• Should use the ear furthest from the

pacemaker to minimize the potential for

interference.

• If you have any reason to suspect that

interference is taking place, turn OFF your

device.

Other Medical Devices

Please consult your physician or the manufacturer

of the medical device, to determine if the operation

of your wireless product may interfere with the

medical device.

RF Exposure Guidelines

Safety Information

Reducing RF Exposure – Use

Properly

Only operate the device in accordance with the

instructions supplied.

International

The device complies with internationally recognized

standards covering human exposure to

electromagnetic fields from radio devices. For

information on 'International' human exposure to

electromagnetic fields, refer to the Zebra

Declaration of Conformity (DoC) at www.zebra.com/

doc.

For further information on the safety of RF energy

from wireless devices, see www.zebra.com/

responsibility located under Corporate

Responsibility.

Europe

Handheld Devices

This device was tested for typical body-worn

operation. Use only Zebra tested and approved belt-

clips, holsters, and similar accessories to ensure EU

Compliance. The use of third-party belt clips,

holsters, and similar accessories may not comply

with EU RF exposure compliance requirements and

should be avoided.

US and Canada

Co-located statement

To comply with FCC RF exposure compliance

requirement, the antenna used for this transmitter

must not be co-located or operating in conjunction

with any other transmitter/antenna except those

already approved in this filling.

Terminals

Use only Zebra tested and approved belt clips,

holsters, and similar accessories to ensure FCC

Compliance. The use of third-party belt clips,

holsters, and similar accessories may not comply

with FCC RF exposure compliance requirements

and should be avoided. The FCC has granted an

Equipment Authorization for these terminals with all

reported SAR levels evaluated as in compliance

with the FCC RF emission guidelines. SAR

information on these terminals is on file with the

FCC and can be found under the Display Grant

section of www.fcc.gov/oet/ea/fccid.

Handheld Devices

This device was tested for typical body worn

operation. Use only Zebra tested and approved belt-

clips, holsters, and similar accessories to ensure

FCC Compliance. The use of third-party belt clips,

holsters, and similar accessories may not comply

with FCC RF exposure compliance requirements,

and should be avoided.

LED Devices

Classified as ‘EXEMPT RISK GROUP’ according to

IEC 62471:2006 and EN 62471:2008.

Pulse duration: CW

Radio Frequency Interference

Requirements-FCC

Note: This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However there is no

guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the

equipment and receiver

• Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected

• Consult the dealer or an experienced radio/TV

technician for help.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received including interference that may cause

undesired operation.

Radio Frequency Interference

Requirements - Canada

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada’s

licence-exempt RSSs. Operation is subject to the

following two conditions: (1) This device may not

cause interference; and (2) This device must accept

any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR

d'Industrie Canada applicables aux appareils radio

exempts de licence. L'exploitation est autorisée aux

deux conditions suivantes: (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de

l'appareil doit accepter tout brouillage radio

électrique subi même si le brouillage est susceptible

d'en compromettre le fonctionnement.

Marking and

European Economic

Area (EEA)

The use of 5 GHz RLAN throughout the EEA has

the following restrictions:

• 5.15 - 5.35 GHz is restricted to indoor use only.

Statement of Compliance

Zebra hereby declares that this radio equipment is

in compliance with Directives, 2014/53/EU and

2011/65/EU. The full text of the EU Declaration of

Conformity is available at the following internet

address: www.zebra.com/doc

Summary of content (2 pages)

PAGE 1
REVIEW ONLY Regulatory Information This device is approved under Zebra Technologies Corporation. This guide applies to the following Model Number: EC300K. EC30 Regulatory Guide All Zebra devices are designed to be compliant with the rules and regulations in locations they are sold and will be labeled as required. Local language translations are available at the following website: www.zebra.com/support.
PAGE 2
REVIEW ONLY Other Countries Australia The use of 5 GHz RLAN in Australia is restricted in the following band 5.60 – 5.65GHz. Brazil Declarações Regulamentares para EC300K Brasil Nota: A marca de certificação se aplica ao Transceptor, mod . Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em Sistemas devidamente autorizados. Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br.