User manual

CHAPTER 4 USER PREFERENCES &
MISCELLANEOUS OPTIONS
Introduction
You can program the imager to perform various functions, or activate different features. This chapter describes
each user preference feature and provides programming bar codes for selecting these features.
The imager ships with the settings shown in Table 4-2 on page 4-3 (also see Appendix A, Standard Default
Parameters for all imager defaults). If the default values suit requirements, programming is not necessary.
To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in
non-volatile memory and are preserved even when the imager is powered down.
To return all features to default values, see Default Parameters on page 4-5. Throughout the programming bar
code menus, asterisks indicate (
*) default values.
NOTE Most computer monitors allow scanning the bar codes directly on the screen. When scanning from the
screen, be sure to set the document magnification to a level where you can see the bar code clearly, and
bars and/or spaces are not merging.
*High Volume
(0)
Feature/Option
* Indicates Default
Option Value