User manual

K - 6 DS4800 Series Corded Digital Imager Product Reference Guide
Downloading a Custom Scan Tone via Scanner SDK Sample Application
Download a custom audio file to the imager using the Scanner SDK C++ Sample Application. The
user-defined tone is represented by a unique attribute number.
1. Place the imager in SNAPI USB communication mode by scanning Symbol Native API (SNAPI) with
Imaging Interface on page 3-4.
2. Ensure the imager is disconnected from the host PC.
3. To launch the Scanner SDK C++ Sample Application, on the host PC select Start > Scanner > Scanner
SDK > C++ Sample Application.
Figure K-8 Scanner SDK C++ Sample Application
4. Connect the imager to a USB port on the PC and wait for the power-up tone.
5. Verify imager is operational by touching the trigger to turn on illumination.
6. Select Discover Scanners in the SDK application. The imager appears in the Connected Scanners list.
7. Select the Advanced tab.
8. In the Custom Good Decode Tone section of the window, select Browse.
9. Select the WAV file to download. Ensure the file does not exceed 65 kB.
10. Select Upload. After a few seconds the status bar on the bottom of the window displays
UPDATE_AUDIO_FILE - Command Success.