User manual

7 - 4 DS4800 Series Corded Digital Imager Product Reference Guide
Parameters
This section describes the parameters controlling the IDC firmware and provides programming bar codes for
setting them.
To set parameters requiring a range of values, scan the parameter bar code followed by two, three, or four bar
codes from Appendix G, Numeric Bar Codes corresponding to the desired value. Scan two numeric bar codes
for parameters with a maximum value of less than 100, for example, IDC Minimum Text Length. IDC Delay
Time requires scanning three digits since the maximum value is 200. Leading zeros are required.
Alternatively, use the sample application to set parameters using the parameter name. The application
provides prompts and error checking to assist in setting the parameters correctly and easily. You must use an
application to set a parameter to a negative value, as the IDC X Coordinate can require.
Table 7-1 Intelligent Document Capture (IDC) Parameter Defaults
Parameter Parameter Name
Parameter
Number
Default
Page
Number
Intelligent Document Capture (IDC)
IDC Operating Mode
DocCap_MODE 594 Off 7-5
IDC Symbology DocCap_SYMBOLOGY 655 001 7-6
IDC X Coordinate DocCap_X 596 -151 7-7
IDC Y Coordinate DocCap_Y 597 -050 7-7
IDC Width DocCap_WIDTH 598 0300 7-8
IDC Height DocCap_HEIGHT 599 0050 7-8
IDC Aspect DocCap_ASPECT 595 000 7-9
IDC File Format Selector DocCap_FMT 601 JPEG 7-9
IDC Bits Per Pixel DocCap_BPP 602 8 BPP 7-10
IDC JPEG Quality DocCap_JPEG_Qual 603 065 7-10
IDC Find Box Outline Sig_FINDBOX 727 Disable 7-11
IDC Minimum Text Length DocCap_MIN_TEXT 656 00 7-11
IDC Maximum Text Length DocCap_MAX_TEXT 657 00 7-12
IDC Captured Image Brighten Sig_BRIGHTEN 654 Enable 7-12
IDC Captured Image Sharpen Sig_SHARPEN 658 Enable 7-13
IDC Border Type DocCap_BORDER 829 None 7-14
IDC Delay Time DocCap_DELAY 830 000 7-15
IDC Zoom Limit Sig_MIN_PERCENT 651 000 7-15
IDC Maximum Rotation Sig_MAX_ROT 652 00 7-16